Jiangsu Wangke New materials Co., Ltd.
Contact: Manager Wang.
Mobile phone: 13141505998.
Contact: manager Li.
Mobile phone: 13775442299.
Tel: 0518 81183228.
Fax: 0518 81183328.
Web site: www.jswkxcl.com.
Add: no. 5 Donghai road, Haizhou development zone, Lianyungang city, Jiangsu province
Today, the manufacturer of pvc plastic template explains the construction technology of plastic building template:
1. Roof plastic building template support: the secondary corrugated spacing is determined according to the plate thickness. Under the general construction conditions, the secondary corrugated spacing of less than 150mm thick floor is 350mm / 400mm / 150mm / 250mm / 250mm / 250 thick slab.
Compared with the normal bamboo plywood template, the spacing of secondary corrugated is increased by 50mm, and the flatness deviation of concrete surface is smaller, which achieves the effect of fair-faced concrete.
2. Shear wall plastic building template support: taking the wall height 2800, wall thickness 300 as an example, using 12mm template, vertical secondary rib spacing is 250mm, using 15mm template, vertical secondary spacing is 300mm.
Compared with the normal bamboo plywood template, the spacing of secondary corrugated and the flatness deviation of concrete surface are basically the same, but the surface of concrete is smooth, the effect of fair-faced concrete is achieved, and the quality of perception is better.
For the plastic building template of the same thickness, under the action of a certain unit and certain load, the deformation of the plastic building template is smaller, the stiffness is larger, and the surface flatness of concrete pouring and disassembling template is better than that of bamboo plywood template.
Under the action of large load, such as shear wall template, the bearing capacity of template is larger, it is necessary to reduce the spacing of secondary corrugated or increase the thickness of plastic building template, that is, it can meet the construction technical requirements of template when the lateral pressure of concrete is large.
"replacing wood with plastic"
Plastic building template because of its environmental protection and energy conservation, recycling economy and affordable, in order to prevent water corrosion resistance and become a new favorite of the construction industry.
This product will gradually replace the wood template in the building template, so as to save a lot of wood resources for the country, and play a great role in protecting the environment, optimizing the environment and reducing low-carbon emissions.
Plastic building template makes effective use of waste resources, it not only meets the requirements of national energy conservation and environmental protection, but also adapts to the development direction of national industrial policy, but also a new revolution of construction engineering template materials.
Scan the code and learn more
Jiangsu Wangke new materials Co.,Ltd
Add：No. 5 Donghai road, Haizhou development zone, Lianyungang city, Jiangsu province